Cram & Conquer

SAT Timer

Practice the digital SAT under real timing. The digital SAT has two sections, each split into two modules. Reading and Writing has two 32 minute modules, and Math has two 35 minute modules. There is a 10 minute break between the sections.

This timer starts at 32 minutes for a Reading and Writing module. Use the Time button to switch to 35 minutes for Math.

How to use the SAT Timer

1. For Reading and Writing, keep the timer at 32 minutes and press start.
2. For Math, press Time, set 35 minutes, then start.
3. Between the Reading and Writing section and the Math section, take a 10 minute break, just like test day.
4. Review your mistakes after each practice module, not during it.

Digital SAT timing at a glance

Reading and Writing: 64 minutes in total, split into two 32 minute modules (54 questions). Math: 70 minutes in total, split into two 35 minute modules (44 questions). With the 10 minute break, the test takes about 2 hours and 24 minutes.

Formats can change, so confirm the current timing on the College Board website before test day.

How to practice pacing

Time pressure is a skill you can train. Do full modules with the timer running, mark questions that take too long, and come back to them at the end. Over a few weeks, track how many questions you finish per module. A timed practice habit matters as much as content review.

Frequently asked questions

How long is each SAT module?

On the digital SAT, each Reading and Writing module is 32 minutes and each Math module is 35 minutes. Check the College Board for the latest format.

Is there a break during the SAT?

Yes. There is a 10 minute break between the Reading and Writing section and the Math section.

Can I use this timer for a full practice test?

Yes. Run four timed modules in order, with a 10 minute break after the second.